Packaging cereals and pulses

filling machine
packaging machine filling system

Filling machine with volumetric packaging (pop corn /snacks / crackers / rice/sugar/legumes/cereals/granules)

Classic Italian Model

Packing system:

Packaging system by standard telescopic cups

Six caliber cups are designed based on the size to be filled and the quality of the materials.

Cups are fed from a 70-litre tank made of stainless steel 304.

The reservoir of the machine is specially designed to maintain the pressure of the material within it for better performance.

All the places touching the food materials are made of stainless steel 304 or polyamed (Artemor).

The trays are equipped with cups to fill the required material with the required weight.

Error rate in size (1.5----2.0%) depends on the regularity of the material density and the qualitative size.

Packaging and cyst formation mechanism

Bag Dimensions: Width of 10-23 cm, length of 10-29 cm.

Bag: in the form of a pillow welded to a central longitudinal welding Centre (welding center) and occasional welding from the top and bottom.

The average speed of the machine from the 35-45packages per minute depends on:

The quality and thickness of the packaging paper used (micron).

Quality and strength of materials.

The specific weight of the substance and the weight required.

The packing quantity.

The speed of the packaging machine and the opening of the configuration template.

Roller specification: Inner diameter of paper reel: 76 mm, largest external paper diameter: 300 mm.

Thickness of the body of the Machine (4mm/5mm)

Pneumatic system (compressed air).

The vertical (longitudinal) and horizontal (occasional) columns of the bag work pneumatic system (compressed air).

All the planons (Silondras) air for a longitudinal and occasional welder and the film's Clouds.

A European feeder system with special paper guides until it reaches the configuration template.

The paper reel holder installs the film mechanically.

The machine is fitted with (1) mold made of stainless steel 304 for the formation of the cyst that is designed based on the customer's packaging paper display.

The paper is calibrated horizontally by mechanically calibrating the paper roll holder.

The length of the cyst is controlled by a photovoltaic cell (photosynthesis that is sensitive to all colors).

Pushing of the paper is made by an engine (Double shaft AC Motor/gear Box).

The occasional welding cushions are made of nickel plated iron.

Welding material of the manufacturer of the aluminum high pressure importer

The motor of an occasional welding group made of galvanized iron.

Occasional and longitudinal welders are insulated with a special thermal insulation to avoid heat problems.

Occasional welders are fitted with air ducts to avoid mechanical shock problems.

The device is equipped with a two-gauge shock-relief manual during the packages' Landing.

Control:

All cutters and composites mounted on the machine Made in Europe (Schneider/Moeller/abb/Siemens).

Link for unloading of Electric charge (EARTH line) for all electrical appliances.

Side Control Panel contains:

Key operating and emergency control keys.

The PID temperature control number (3) for longitudinal welding, front and rear.

A private computer (PLC) is programmed for all machine operations that are linked to the control screen (DELTA or LS).

Touch-colored control screen to control all the movement of the machine (DELTA or LS).

speed control of the electronic device by brand (DELTA or LS).

Working environment:

Electrical Recharge: 380 Volts, 3 wins, 50-60 Hz (possibility of modification).

Electrical power of the Machine (K.W).

Temperature: Ambient temperature of 10-40 °c.

Humidity of 10-90 is not condensate.

Paint:

All metal surfaces that are in contact with the food materials are made from the 304- stainless steel.

The body of the machine is painted with thermal coating.

Warranty:

Al-Faraj Engineering Industries guarantees the machine for a period of one year (12 months) from the date of supply against the defects of the industry (except for spare parts consumed).

Maintenance: In the event that the customer wishes to contract the work of a maintenance contract on an annual basis, the Company shall agree on a specific payment agreed upon by the parties and renew if the parties so desire.

Materials that are packaged by the machine:

Pop corn

Snacks

Grain and Beans

Sugar rice lentils

Wheat Beans

Peas

Soybean Corn Wheat

Wheat Beans

Granules